PDA

View Full Version : vfr 400



simonducati
11-01-07, 05:21 PM
http://i120.photobucket.com/albums/o184/simongsi/sideshot.jpg
http://i120.photobucket.com/albums/o184/simongsi/front-1.jpg
http://i120.photobucket.com/albums/o184/simongsi/damage.jpg

For sale is my VFR 400 NC30, 1989, The bike has done 46209 km which is about 29000 miles, it is taxed until 30th June and, MOT'd until 7th June. As you can see it has a stainless steel end can which is road legal but i do have a DEP carbon oval can which is included.

The bike had a service on 13/7/06 (43295 km) with receipt to prove where it had a new alternator, rear pads and little things like wiring connectors. I have also recently put a new rear tyre on the bike which is hardly used and changed the oil and filter (both withing last 600 miles) The bike will need a new front tyre as the current one is on the wear limit.

As you can see the fairing on the right hand side is badly damaged but this is due to the lower fixing point breaking and the fairing coming off the bike and sliding down the road so i have to point out the bike itself has never had a crash just the fairing.all that is really needed is the two side panals although they are secure at the moment.

Mechanically the bike is brilliant, starts everytime cold or hot, sounds lovely and as everyone knows goes like a rocket and handles very well, It's registered as 33 bhp although the washers have been removed so it is running at about 60 bhp i believe (can be replaced if needed).

By all means this bike isnt a1 and does need some TLC but it is perfectly rideable as it is, .

The paddock stand and haynes manual are included in the auction

If you have any questions feel free to email me and i will get back to you asap.
im after about ?1100ono

simonducati
18-01-07, 06:22 AM
bump
open to offers

rc
19-01-07, 11:53 PM
still condering swap?

http://www.novaload.net/forum/showthread.php?t=70668