PDA

View Full Version : 1300 Parts + other nova bits


garyc
09-01-07, 08:34 PM
PM me if you need any pictures

OMP sump guard, brand new never fitted ?186+VAT from Demon Tweeks. ?125

Weber 32 34 DMTL inc air filter ?85

Head from a 1300 which has been bead blasted, and cleaned up, 3 angle cut on all the valvle seats & been skimmed to raise CR. ?80


K&N airfilter for Pierberg carb, 1.3 & 1.4 cleaned and re-oiled as per K&N instruction so as like new ?25.

5 of 1.3 SR cylinder heads ?10 each
5 of 1300 Cam carriers inc cam ?5 each

Fuel pump as new condition ?5

Alternator inc bracket ?5

Weber DCOE balance bar levers ?10
Welsh Dan
10-01-07, 05:59 PM
How much for postage to Wrexham on the fuel pump?
SRlew
10-01-07, 07:17 PM
PM'd
garyc
10-01-07, 08:17 PM
? I can post the pump for ?10, I'm just waiting for someone else to come back to me on it. If they dont I'll PM you.

PM replied!

Carb provisionally sold
garyc
13-01-07, 05:47 PM
Pump now provisionally sold.
NovaHopeful
14-01-07, 08:02 PM
Hi Mate,

I am interested in a 1.3sr Cylinder head, cam and carrier, And possibly the webber & filter

Are they all good?

Wherebouts are you located?

Would you post them? If so, how much to gloucestershire?

Cheers
NovaHopeful
14-01-07, 08:03 PM
Sorry guys jsut noticed the dates on the previous posts
garyc
14-01-07, 10:03 PM
Hi

The heads are disassembled and degreased, but all the bits are there. You would want to put new oil stem seals on any way and may be a bit of a clean or skim. They also need new thrust pads too.

I reckon I could post for ?25.
garyc
17-01-07, 06:45 PM
Weber carb and fuel pump sold. All other parts still available.
garyc
22-01-07, 09:16 AM
btt
garyc
27-01-07, 09:41 AM
up again
tinyrally
27-01-07, 12:24 PM
hi ya interested in the weber k&n. how much inc p+p to PLymouth
garyc
27-01-07, 04:57 PM
Hi

It is already sold, I may have another one available soon, keep your eyes on this ad!
coochiSR
28-01-07, 01:46 PM
hello gary i might be getting a weber 32/34 but all i need is the adapter plate to a 1400 inlet manifold. Would you have one?
garyc
28-01-07, 06:08 PM
No, try www.webcon.co.uk (http://www.webcon.co.uk) they are the weber importers. They do the plates for a 1300 so I suspect you can get them for a 1400 too.

Otherwiser you will have to get one made.
coochiSR
28-01-07, 06:55 PM
o okies cool thanks alot and how would i go about getting 1 made?
garyc
28-01-07, 09:24 PM
Find an engineering firm tell em what you want (& you will pay cash), they'll tell you how much. If it replaces twin choke pierberg this may do the job Part number 9990222400
Price ?32.76+VAT

but check with webcon 1st.