View Full Version : driveshafts
white2lSR
29-12-06, 07:19 PM
is it only the nova gte that has the 22 spline shafts or do sr's also have them? tried searching but cant find an answer to this
Philsutton
29-12-06, 07:25 PM
GTE's, some GSI's and some TDs had them
white2lSR
29-12-06, 07:38 PM
so that means the sr hubs will be no good then?
Philsutton
29-12-06, 07:43 PM
nope all nova shafts will fit any nova, its the inner cv end of the shaft thta is different spline, i.e the cv's have the same spline on the 22 spline ones and so go in the box but therefore for the Cv is 22 spline on the inside to go on to the shaft
white2lSR
29-12-06, 08:00 PM
so now i need to get myself some gte shafts and hubs. can anyone help?
no, u DO NOT NEED different hubs
ALL NOVA OUTER CVs are the same, therefore u do not need new hubs
you need the shafts that have 22 spline INNER CV ends
white2lSR
29-12-06, 08:13 PM
ahh! sorry. i get you now. so i need some GTE or similar shafts and MK2 cav inner cv's.?
Yes, u need the shafts that have 22 splines on the INNER CV end of the shaft and use MK2 Cav 1.6 Inner CVs to go into the F20 Box!
STD nova outer CVs and Hubs are sufficient! If LET lads run em then theyre good enough for XEs
Yeah
Just make sure the inner end of the shaft is 22spline.
white2lSR
29-12-06, 08:27 PM
i might be able to get them new from a local motor factor
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.