help me please just one thing to get it running

[corsa_gt]

motor
http://i138.photobucket.com/albums/q264/corsa_gt/meumotordecima.jpg

the place where de distributor should go (thing that takes the juice to the spark plugs )
http://i138.photobucket.com/albums/q264/corsa_gt/sitiododistrib.jpg

ok this was a electronick injection i want to put carbs so all i need to know is which distributor i can use frome what vauxhall car and what exaust i can use a sr maybe ????

[Adam]

You will need a 1.4sr(14nv) distributor, coil, coil loom.

And you'll need the plate that holds it, a stud bolts into the head under the dizzy hole(you can see the thread on the bottom pic)

[corsa_gt]

??????????

[Mike]

An Opel Corsa A 1.4 SR Distributer & Coil (condenser) and the wiring loom for it ;)

[corsa_gt]

the distributor has to be like a gte one
but her in portugal that model was never sold
need to know what other vauxhal models will serve
i tryed a 1.3 sr and dos not do the job thanks aney way [[[]]]

[Mike]

Erm, Cavalier 1.6cc?

[Adam]

A Opel Corsa 1.4SR.

A Opel Corsa GTE/GSI one isn't suitable.

[corsa_gt]

can you guys post pics ov a caviler an a sr the cars her ar of different names thanks

[Dod]

You need an Opel Corsa GT distribter, it or an Ascona item. It needs to be a Carb'd Model Distributer. Get the Coil and the modle the coil sits on as well. Wire up the Coil and swap all over. You may also need the Cam carrier to fit the Dizzy to as well

[Dan]

Following on from what dod has said, i am unsure if the following picture is any good, its one of mine that shows the type you want.

http://www2.novaload.net/files/dan/2006/bay.jpg

[Dod]

Yup, thats the one, although i did think the Dizzy caps were black and longer, but it doesn't matter as long thugh. Also, note the way the Cam carrier differs from your own one as well.

[corsa_gt]

ok tomarow im gana go to a scrap yard se what i can get thanks you guys

[Adam]

Your cam carrier will be fine for use with a dizzy.

[corsa_gt]

ok iv don it thanks to you all for the help