View Full Version : button for door poppers
raymond
11-12-06, 06:41 PM
when i bought my car it had no door handles in it they are on a button under the mirror think the button as gone knackered as the passanger side wont open
its a little red button what would be the best button to replace it with
Maplin (www.maplin.co.uk) do a variety of buttons, not sure how door poppers are wired in but they do buttons like this (http://www.maplin.co.uk/Module.aspx?ModuleNo=19261&criteria=push%20button&doy=11m12) which may be of help?
raymond
11-12-06, 07:02 PM
yeah mate cheers that was a great help think ill get some from their
Matt2107
13-12-06, 12:14 PM
See if you can get some really flat or flush fit ones.
Will look great.
Something like this http://www.maplin.co.uk/Module.aspx?ModuleNo=19096&criteria=VANDAL%20RESISTANT%20SWITCHES&doy=13m12
chimp007_uk
13-12-06, 12:58 PM
makesure their waterproof, as the contacts inside will corrode
raymond
13-12-06, 04:44 PM
See if you can get some really flat or flush fit ones.
Will look great.
Something like this http://www.maplin.co.uk/Module.aspx?ModuleNo=19096&criteria=VANDAL%20RESISTANT%20SWITCHES&doy=13m12
yeah they would look so much better and alot easier to use than the one that is on the car now
raymond
13-12-06, 04:46 PM
makesure their waterproof, as the contacts inside will corrode
i think that is what has happened this time when you pull the handle inside the car you can here the solonoid but when you push the button it dont work:confused:
Matt2107
13-12-06, 04:56 PM
I think you need to look for something that is IP65 rated
http://www.aquatext.com/tables/ip_ratings.htm
This explains the ratings.
You'll want IP 68 otherwise a pressure washer will cause your corrision problem again.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.