PDA

View Full Version : 2.0 16v judder..please help!!!


EUROTURBO
24-11-06, 10:07 AM
car was ok till the other day when it started to judder like it was getting starved of fuel. only every so slightly and not all the time. but its anoying as hell to be jerking (lol) down the road when i wasnt the other day....

any ideas, i think its the air flow meter or the fuel pump. please someone push me in the right direction. lol
NickWalliams
24-11-06, 01:03 PM
does it only do it at very low revs?
General Baxter
24-11-06, 02:18 PM
were you going around a corner, when it jerks?
NOV4_SPORT
24-11-06, 02:42 PM
could be dodgy spark plugs ?, might need new ones or re- gaped
Adam
24-11-06, 02:49 PM
Do you have a carb fuel tank fitted? Lol
EUROTURBO
24-11-06, 05:48 PM
gonna try sum new plugs. na it was a GSI you penis lol

it had both a fuel feed and return....lol
letvalva
25-11-06, 04:29 PM
has it had the breather mod done?

if not do it
draper
25-11-06, 06:20 PM
air getting in somewhere like at the sfi box ??
Lee
25-11-06, 06:44 PM
Plugs and leads first! And use NGK's, not decidedly homo Bosch super 4's or any other multi electrode 'make your car go faster' plugs!
EUROTURBO
26-11-06, 01:09 AM
changed plugs for NGKBKU6EK (2288)'s still no change. gonna change the leads. i know what some of you are saying but its not the breather problem that is the problem it is electrical.

gonna change the rotor arm and dizzy cap too hopefully that will sort it.

glen
Mike
26-11-06, 10:07 AM
has it had the breather mod done?

if not do it

erm, why?? Ill be XE'ing mine soon so info on this would be good :thumb:
Adam
26-11-06, 06:49 PM
XE's that haven't had the breather mod done sometimes judder etc at low speeds.
Mike
26-11-06, 06:56 PM
XE's that haven't had the breather mod done sometimes judder etc at low speeds.

what is this breather mod then??
craig0120
26-11-06, 07:02 PM
search migweb and theres a link to a guide on it
Adam
26-11-06, 07:11 PM
Basically, you drill holes in the plate inside the rocker cover, to allow oil to drain back into the head instead of getting thrown out the breather pipe and entering the throttle body, then the cylinders.
Philsutton
26-11-06, 07:18 PM
I do the breather mod completely different. That plate on the bottom of the rocker cover I cut it all off apart from bit at the end with the two breath pipes. A few people i know have done it in the way everyone says, but it still smokes ect.. under certain situations.

Been doing that for ages and never had any problems.
craig0120
26-11-06, 09:46 PM
I do the breather mod completely different. That plate on the bottom of the rocker cover I cut it all off apart from bit at the end with the two breath pipes. A few people i know have done it in the way everyone says, but it still smokes ect.. under certain situations.

Been doing that for ages and never had any problems.
also heard of this one
makes more sense lol
EUROTURBO
26-11-06, 11:57 PM
im gonna do that i think but thats not my priority as a C20LET is going in in feb for the new season. lol

jus need to get this running cool for the winter.
H15 NVA
27-11-06, 07:19 PM
let eh?? might aswell get a trade account set up at my mates tyre shop!! lol.