PDA

View Full Version : 1600 Race Spec Engine With Lsd



d11ova
23-11-06, 11:04 AM
1600 8v full race spec engine and gearbox running on twin 40 carbs with small chrome trumpets, blue printed bottom end, lightened and balanced pistons and con rods, lightened and balanced flywheel,pollished con rods,big valved head:-polished,ported and gas flowed, wasted stem valves,solid lifter kent cam,race spec valve springs,kent cam pulley,arp rod bolts,inlet manifold:-ports matched to cylinder head,zf lsd in a f13 box ,lower finial drive, uprated 100amp altanator with custom bracket to fit twin 40's on,silicone hoses,braided fuel hoses, electric facet feul pump fuel pot and gilter ,chrome header tank,pipercross filters,omex rev limiter and launch control,digital speedo.

Only just taken out of the car because i sld the car without the engine, egine had just had a rebuild after doing 5000 miles, its had new piston rings, headgasket,stem seals, all valves ground in to seat properly, cambelt, rocker cover gasket and oil and filte, the carbs will need setting up as it has not ran for a while due to the car being off the road.

There is instructions with the digital speedeo which you type your wheel and tyre size in and it will give you a 100% right speedeo reading, also you can do 0-60, 0-100 and quarter mile, the rev limiter comes with launch control which you can set the revlimiter to what ever you want, curently set at 7,500 rpm.

This engine was rolling roaded about 1 year ago and it was pushing out 148.7 bhp at 7,450 rpm at the flywheel and 110 lb/ft
this will all be sold as seen as you know yourself you cant waranty a second hand engine.

This engine sounds and looks the dogs danglers im open to sensible offers but please remember this lot cost me near on ?3000 with the limited slip diff and all the ad ons.

Im located in hinckley, leicestershire the midlands,

Can deliver at extra cost.

Call or email me on 07970436925.
http://i31.photobucket.com/albums/c376/d11ova/STA40553.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40554.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40555.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40556.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40557.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40549.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40550.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40551.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40551.jpg
http://i31.photobucket.com/albums/c376/d11ova/STA40567.jpg

d11ova
24-11-06, 09:46 AM
Forgot To Mention Its Had A New Starter Motor Aswell.

Martin
24-11-06, 09:50 AM
How much you looking for it mate?

any reciets?

d11ova
24-11-06, 04:10 PM
I Didnt Keep The Receipts, And Im Open To Sensible Offers On It, As There Is Alot Of Moneys Worth There So I Need To Get As Much As Possible.

Karl M
24-11-06, 04:27 PM
I carnt belive you got ?4100 with a 1.2 lol

Martin
24-11-06, 04:29 PM
if i had a enuf money for a goo offer i wud but i'v just bought a xe lol

d11ova
25-11-06, 08:35 AM
well what can i say, its one of the best novas around here and it sold for ?4500.

dhdev (Oli)
25-11-06, 09:32 AM
Sort out the torque figure you claim in the ad, its misleading potential buyers :roll:

s14a
25-11-06, 06:47 PM
175 seems a bit much alrite???

d11ova
26-11-06, 10:03 AM
sorry , i was looking at the wrong print out, its 110 lb/ft.

cammy1903
29-11-06, 02:47 PM
hOW MUCH FOR THE ENGINE MATE?

d11ova
01-12-06, 06:36 PM
all pms replied

Stoo
01-12-06, 06:49 PM
PM with prices please

Mark330d
01-12-06, 09:58 PM
rough idea of price please?

d11ova
04-12-06, 08:10 PM
the whole lot is on race cars direct for ?2250 but im open to sensible offers

Stoo
04-12-06, 09:55 PM
**** that! Absolutely Ridiculous money!!
About half that is realistic!!

Bruces GP A Spec lump went for ?800 ish IIRC!!

S1 RST
04-12-06, 10:11 PM
**** that! Absolutely Ridiculous money!!
About half that is realistic!!

Bruces GP A Spec lump went for ?800 ish IIRC!!

no it didn't at all went for twice that thanks

Stoo
05-12-06, 04:24 PM
I stand corrected!! But as far as i remember it was only advertised for that!!

Anyway! Still far too dear for an engine with no receipts!!

Matt2107
05-12-06, 04:29 PM
I Didnt Keep The Receipts, And Im Open To Sensible Offers On It, As There Is Alot Of Moneys Worth There So I Need To Get As Much As Possible.

Why would anyone build such a high spec engine and not keep receipts :roll: