info help

[swindon_1.3sr]

alright guys. used to use this forum about 3 years ago before i sold my nova .. any how i have a friend that is looking for some info on rear disc conversion i cant remember what the site was but does any one know or could post a link to any sites regarding rear disc conversion

[bump]

I think I have the guide stored on my other machine, I'll have a look tomorrow and update this thread.

[graham kirkbride]

hi mate!!! personally without fitting a bias valve etc i would not bother with rear disc`s, your rear brakes will lock up all the time.

[swindon_1.3sr]

I think I have the guide stored on my other machine, I'll have a look tomorrow and update this thread.

cheers

[swindon_1.3sr]

hi mate!!! personally without fitting a bias valve etc i would not bother with rear disc`s, your rear brakes will lock up all the time.

its not for me just looking up the info for a mate i did look into it when i had my sr but looked too much hassel ,my current car has them as standerd so i dnt know how u do it

[Lee]

Have to agree with Graham, it really isnt worth doing to a road car. You only have to reduce the braking force to them untill theyre doing the same job the drums were.

If you want it to look pretty, ok, but really the main advantage of this conversion is for more precise brake tuning and better cooling, as well as a slight weight loss.

[bump]

I can't seem to find it on this machine. Possibly deleted during my last rebuild.

Sorry about that.


EDIT: it can be found in the mechanical modifcations section of nova land (http://www.nova-land.com/)