PDA

View Full Version : sr cam in a 1.2


Anonymous
14-05-01, 01:54 AM
i've got a 1.2 nova and want to put the cam from a 1.3sr in it
What do i need and is it easily done 'cause i'm doing it myself. :D
Anonymous
14-05-01, 09:52 AM
If u can i would get the 1.4cam as it has a higher lift!!
Its not the easiest thing in the world m8!
First of all u need a headset (gaskets, bolts etc)
Also u make sure u put plenty of decent new oil on the cam before running!
If u havent already got 1 get the haynes and read that!!
D1cko
Anonymous
14-05-01, 03:55 PM
there is also a proper way to doing the head back up by using a torque rench and doing different degrees and also running the engine for a time then doing it again.
i think this is correct
ask rob26 he done it
laters

DFBA19168@CABLEINET.CO.UK
NOVADOSE75@HOTMAIL.COM
Anonymous
14-05-01, 04:12 PM
not easy but u should manage just get timing absolutely spot on. then read haynes carefully.
dan f did ur m8 tighten bolts then slacken them b4 tighting again???? not a good idea id have said. :-/

[-dave_hay.jpg-]
Dave_Hay@novaload.org.uk
Anonymous
14-05-01, 10:33 PM
not sure what he done but it were the timing that was out i think,
whats this bout a krypton tune for timing? ne 1 heard of it?
and i think the skills of mc were needed to get her running again!

DFBA19168@CABLEINET.CO.UK
NOVADOSE75@HOTMAIL.COM
Anonymous
14-05-01, 11:05 PM
dont get the 1.4 one as u will need a new dizzy and coil and sum wireing to suit

Micky@novaload.net :)
Anonymous
15-05-01, 12:08 AM
krypton tunes are fantastic!!!! about ?15-30 for a quick tweek to get it spot on. its not a "power" tune more of a get it running right tune!!

BEng Hons Automotive Electronics Engineering :) worship my electronics skills :D
Anonymous
15-05-01, 12:17 AM
just had 1 done today along with other things as for the krypton tune my car is spot on lol hour b4 i was geting flames outta me carb
Anonymous
15-05-01, 02:06 AM
There's loads of mobile Krypton Tuners about. I had mine done a couple of weeks ago.
Anonymous
15-05-01, 05:05 PM
I want to fit an SR cam in my 1.2,loadsa peeps tell me it will be fine,has anyone ere done it:-/
Anonymous
15-05-01, 10:57 PM
so is the cam a straight swap or will anything else need changing