PDA

View Full Version : Aerial



Anonymous
13-05-01, 05:51 PM
I have managed to drop my aerial on my SRi down in to the wing, anybody know a good way of getting it out? Cheers

Anonymous
13-05-01, 07:10 PM
sorry fella, the only way to do this is to remove the wing.

or drop a small magnet through the hole.

to take the wing off is easy on a mk2- 2 bolts under plastic in footwell, 6 or so under bonnet, and one behind back bumper.

good luck

:p
Im tall and your small
:p

Anonymous
13-05-01, 07:56 PM
You should try sticking a piece of strong wire (with a U in the end) up the hole located at the bottom of the A pillar. You should then be able to pull it out.

(Yoy should have un-bolted the flap on the inside edget of the inner arch!)

Anonymous
13-05-01, 08:02 PM
you could just leave it there.

just a thourght

BEng Hons Automotive Electronics Engineering :) worship my electronics skills :D

Anonymous
13-05-01, 09:13 PM
and leave the hole there?


Micky@novaload.net :)

Anonymous
14-05-01, 08:57 AM
leave it there and fill the hole in !! (like I have)

Which W4nker made nova's with a 49 offset !!!!!

Anonymous
14-05-01, 09:12 AM
can you not fit your hand through the little hole behind the front wheel. I did this and got it out ...took me hours though

Anonymous
14-05-01, 09:20 AM
pull on the wire in the battery tray to lift it up then get it through the access hole

--- Novaload technical support open 24hrs ---
--- Phone/SMS Support 24hrs ---
--- Workshop services 6pm - 11pm Mon - Fri, 9am - 11pm Sat/Sun ---
--- 16v engine fitting advice ---