need help please lads????

[c'2.0lrt]

ok here goes(non machanical explaining??)
xe fuel not going through fuel reg? is this do to not enough vacum?
fuel is getting there,but ive taken the triangle plate off end of injector rail and no fuel is getting to injectors? any help would be great????:confused: :tard:

[Adam]

Is the fuel pump working?

Are the supply/return lines on the correct part of the fuel rail?
Return goes to the fuel regulator.

[c'2.0lrt]

yeah thats all in the right place fuel is getting to the reg but not going through it?

[Austin_Nova16]

The regulator is at the end of the fuel rail (ie. on the outlet).
It sounds like you do have the pipes on the wrong way...

[c'2.0lrt]

fuel in goes to reg if i take reg off it piss's out but i put it back on and it doesn't go through to rail????? plus reg is brand new

[Stoo]

no, fuel reg should be on the outlet!

[c'2.0lrt]

fuel in on left or right as you look at engine?drivers side or passenger????
(should get me a haynes really?)

[Philsutton]

feed is on the passager side of the rail while the return is on the drivers side where the regulator is.

[Stoo]

Im sure the fittings are a different size on the inlet/outlet anyway!

Have u tried podging the bleed valve on the rail?? may have an airlock

[c'2.0lrt]

well thats the prob then ive been told its the other way round?

[Adam]

Yep, return goes on the end of the regulator side.
As it regulates how much fuel returns to the tank.

[Stoo]

It actually regulates the pressure in the fuel rail by restricting the flow of fuel back to the tank, kinda like putting your thumb over a hosepipe!

[c'2.0lrt]

cheers thats helped alot i'll let you know what happens