View Full Version : Heaters broke
kronk10
03-11-06, 09:38 PM
Its coming up to winter now and my bloody heater has broke it gets warm if you turn it hot and cold when you turn it on cold. But when i turn the actual fan on (not the heater) it blows a fuse:confused: is it because it has been water damged? i did take the plastic cover off the top of the heater in june-july but i cant see how its got wet? will i need a new heater and plastic cover:wtf:
the switch can fail, so can the fan speed resistor
mikey14sr
04-11-06, 11:33 AM
Change the fan motor, the brushes will be worn out and that is what normally causes the fuse to blow, as it trys to draw too much current.
kronk10
04-11-06, 03:43 PM
Change the fan motor, the brushes will be worn out and that is what normally causes the fuse to blow, as it trys to draw too much current.
If i can get the whole heater cheap would that be better:confused:
novawise
04-11-06, 04:03 PM
i had that problem last month my heater motor had seizd
Just replace the blower motor.
Its held on with two nuts.
ive just thrown my blower out aswell
mikey14sr
04-11-06, 08:16 PM
Just replace the blower motor.
Its held on with two nuts.
Thats what i meant to say.:roll:
Thats what i meant to say.:roll: Lol, i never saw your post as i left the webpage open this afternoon so when i posted, your post wasn't there as i didn't refresh the page ;) :p
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.