1.2 carb!!!!

[Anonymous]

what do i need to do to convet my 1.2 Mk1 nova to have a Twin choke auto carb from a 1.3sr

[Anonymous]

i was about to ask the same question but mines off a 1.4. its a 2E3 carb. ive stripped it down and rebuilt it and i have a 5 pronged ring that came from the choke end but its split, is it important? and also i have a glass/plastic ball (a little bigger than a cartridge ball), now im not sure if this is out of the carb. please tell me


cheers

BEng Hons Automotive Electronics Engineering :) worship my electronics skills :D

[Anonymous]

you will need the manifold from the sr and most of the water pipes coz the earlier ones are different. If your looking to gain power i would not bother and just get a weber- you will still need the later manifold so its just the same amount of work but more power.

True, True...

[Anonymous]

dont bother with pierburgs there sh*t i ad the 1b and the 2b and they were both pants go for the weber either 32/34dmtl of 40's if u can affort it

[Anonymous]

so ne way i have to replace the carb on a 1.4. and the stuff i mentioned in my previous post still stands and needs to be answered. cheers

BEng Hons Automotive Electronics Engineering :) worship my electronics skills :D