PDA

View Full Version : 288mm brake setup.



DIY*VALVER84
16-10-06, 05:11 PM
hi,
does the vectra 288mm front brake setup go onto a nova easy?
i know i would need to get discs drilled to 4 stud but i need to know if the calipers bolt up to a nova hub.
ive got 256mm now but want bigger brakes will there be much difference?
cheers.

burgo
16-10-06, 05:13 PM
calipers bolt straight up but as you said you need the disks drilling and spiggot rings for the disks

Adam
16-10-06, 05:17 PM
I wouldn't bother for a road car tbh.

Philsutton
16-10-06, 05:18 PM
dont need to re drill them, you can use fiat coupe / alfa 155 discs, they are four stud but will need the hole drilling out as they arent the same bolt spacing as vauxhall. Also they arent 288mm they are 286mm or something.

burgo
16-10-06, 05:18 PM
I wouldn't bother for a road car tbh.have you ever tried them?? i upgraded from 16v brakes and wouldnt go back to them

Adam
16-10-06, 05:26 PM
have you ever tried them?? i upgraded from 16v brakes and wouldnt go back to them
Personally no, but 256 do the job just fine.

burgo
16-10-06, 05:28 PM
Personally no, but 256 do the job just fine.thing is thats what i thought till i put my v6 brakes on

Adam
16-10-06, 05:42 PM
I'd probably change my mind if i had them too...

burgo
16-10-06, 05:51 PM
I'd probably change my mind if i had them too...hmmm look whats in my thread in for sale forum :roll: lol

Adam
16-10-06, 06:05 PM
I didn't say i wanted any lol

gkjnr
17-10-06, 09:07 PM
my mate just fitted them ,he used the fiat discs cos you only need to elongate 2 holes by 2mm and you don,t need spigot rings

DIY*VALVER84
18-10-06, 07:40 PM
burgo, how much you do the lot for?

Riggy
18-10-06, 07:45 PM
v6 brakes ****ing rock lol

burgo
19-10-06, 02:03 AM
burgo, how much you do the lot for?you have a pm ;)

stafford
19-10-06, 03:08 PM
try www.chrisastleymotorsport.com.uk (http://www.chrisastleymotorsport.com.uk) for the spigert rings he my be able to drill them to 4 stud heres his number to 07779279918

craig green
19-10-06, 06:31 PM
Personally no, but 256 do the job just fine.

You wouldnt say that if you had 150bhp+ & had sampled brakes on such puny modern cars such as 1.25 mk5 Fiesta etc. 1.0 Nova could justify the stopping efficiency of 288 IMO. But we all know the servo/pedal & master cyl on the factory Nova is to blame.

stafford
19-10-06, 06:52 PM
when they say 288mm were do u measure cause i bought some hubs probably off a astra gsi and i need to replace the discs. cheers

Adam
19-10-06, 06:58 PM
Astra gsi will be 256mm.
Its the diameter of the disc.

Matt2107
19-10-06, 07:03 PM
v6 brakes fit on 15"s?

Adam
19-10-06, 07:25 PM
Behind some 15s yeah, depends on spoke design.
They go behind Vauxhall 15" wheels.

Philsutton
19-10-06, 08:14 PM
right mine fit under my 15 inch corsa sxi wheels but as i found out at pod this weekend the 15 inch astra gsi wheels i have my sticky tyres on catch my caliper quite badly. That is all down to the fan style design though as its the fan that catches.

burgo
20-10-06, 11:46 AM
they fit under 15" steelies a treat ;)

DIY*VALVER84
20-10-06, 05:28 PM
lol sounds like burgo's rolling in the ultimate sleeper!
seen one of majica's butcherys earlia...frightening worksmanship.