Camber after lowering?

[Anonymous]

Hi

i wanna lower 50mm on me std sus 1.3sr, and am wondering will the camber need to be redone?

can it be done at like ATS or somming cheaply?

[Anonymous]

you will have to adjust the toe in to account for the camber.mine is set at 1.5mm front and 6mm at rear.it can be done on four wheel tracking system at ATS or places like that.
:D

[Anonymous]

how much did it cost?

RobDmr@aol.com
xr2 ??? i'd rather walk!

[Anonymous]

only bother with the camber if you are chewing tyres to quickly

after camber adjustment the tracking will be out again so that will have to be reset if you do the camber

Micky@novaload.net :)

[Anonymous]

i am chewing tyres up !!! its not good

RobDmr@aol.com
xr2 ??? i'd rather walk!

[Anonymous]

a set of tyres only last me 3 months on the front.

[Anonymous]

What I did was elongate the top of the two hub bolt holes on the front shocker outwards, then took it to an engineer to get the tracking/camber adjusted. When I got it back I just welded the top washers in place so it won`t move when I take it to bits again! Cost ?60.

[Anonymous]

1 month for me b4 i done my camber!


Micky@novaload.net :)

[Anonymous]

so for 50mm does it need doing?