View Full Version : thank god finally a grill
finally ive found a grill for my nova. ive been after a sr one for ages
http://i99.photobucket.com/albums/l281/joncheets/STA50080.jpg
but it does look a litttle worn
will this go out with bumper care
a and also on a nova where is the dizzy cap? mines not starting might be a leaky dizzy cap
cheers
Dizzy cap is on the end of the dizzy, with the HT leads plugged onto it.
Thats one under the grill in the pic /\
the grill will probably not be back to best with bumper care to get the best results you will have to paint it
Must be how tired i am, but despite being on a car forum, i opened the page expecting a picture something like this.....
http://upload.wikimedia.org/wikipedia/en/e/e7/George_foreman_grill.jpg
studaman21
26-09-06, 08:27 PM
Must be how tired i am, but despite being on a car forum, i opened the page expecting a picture something like this.....
http://upload.wikimedia.org/wikipedia/en/e/e7/George_foreman_grill.jpgpmsl
on a serious note you can get some paint for hard plastics that will match the colour
Nova-Flair
26-09-06, 08:39 PM
I'd try bumper care first, make sure you give it a few applications and if that doesnt work then try painting it.
krobinson
26-09-06, 09:56 PM
I'd try bumper care first, make sure you give it a few applications and if that doesnt work then try painting it.
Trouble is, if you use the bumper care, you'll need to give it a serious cleaning before trying to paint it.
Keith
yeah thought that. ill give it a clean and a t-cut and wax. might be ok.
if it's plastic finish, t-cutting will do **** all
Nova-Flair
27-09-06, 12:23 AM
Trouble is, if you use the bumper care, you'll need to give it a serious cleaning before trying to paint it.
will you not just sand it off anyway when its being prepped for paint?
Matt2107
27-09-06, 09:46 AM
I'd say a rigorous clean... then try some bumper car, like nova-flair said give it a few coats... might be worth leaving it a few days between coats.
craig green
27-09-06, 10:01 AM
Just spray it & be done with it. Cant see what all the fuss is about tbh. Did you have trouble finding a mk1 grille or something?
hendrix
27-09-06, 10:05 AM
ive got 4 of them lol
and one of these
http://www.georgeforemangrill.com.hk/logo/gfg.gif
lol
yeah thought that. ill give it a clean and a t-cut and wax. might be ok.
Nooooooooo
Keep all T-cut, and wax polishes away from vinyl/plastics, as it dries and leaves white dust all stuck into the marks etc on it, and you can't get it back off.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.