GTE SEATS

[Anonymous]

I should be getting my gte seats on monday,if all goes well,I should be getting the subframes with them too.What is involved in fitting the front seats?-as removing the rubbish merit ones I have was so easy.Also,will the backseat be a direct fit into my car?-as it is not a 2 piece,split like the GTE n SR ones:-/ also,does anyone have just the front GTE door cards?

[Anonymous]

seats will bolt in even easier than the standerd crap as you only need the 2 front bolts. the back seat will fit spot on as well

Micky@novaload.net :)

[Anonymous]

The rear seat won't fit straight in, 'cos you'll not have the extra brackets required, since you don't have a split-folding seat.

You'll need these two brackets out of a scrapper, but they're welded in, so you have to chisel out the spot-welds, or grind them out. You could also drill the spot welds, but which ever way you do it, you need these extra brackets. One for the back-rest, and one for the front edge of the base.

[Anonymous]

i didn't bother with any extra brackets they are ok!

RobDmr@aol.com
xr2 ??? i'd rather walk!