2.0 16v little adjustments

[stafford]

2.0 16v conversion
wat other little things are there heard that the gear linkage needs altering and the bottom pulley hits the chassis so u have to nock that it also same were the altinator is and which throtal cable do i use.cheers
:thumb:

[Mazz]

Bottom pulley will be fine aslong as you use a single one
Alternator need some chassis leg modifying to clear (sp)
Astra GTE throttle cable iirc

http://www.novaload.net/forum/search.php

[Adam]

As Mazz said.
Use the throttle cable from the XE.

Use the nova clutch, speedo cable.

The gearlinkage just needs the universal joint flipping 180deg iirc, so it reaches further.

[Ste L]

Bottom pulley will be fine aslong as you use a single one


i've still got the double bottom pully on mine, and its fine :thumb:

[DIY*VALVER84]

me too, still running double vee pulley and its fine no rub...but i did have to mod the chassis legs to clear the alternator tho. xe cable is used and all you have to do with the linkage is look down at the box and you can see a white knuckle type joint, just spin it 180deg and that makes the linkage the correct length,all the best.
p.s you might have to play round with the downpipe/manifold to get the exhaust to fit.

[Chris]

front mount and gearbox spacer is required

[Stuart]

and using real words not text ones help fitting too