View Full Version : tie bars
nova~norm
16-09-06, 01:00 PM
i put a 2l 8v engine into may nova yesterday and the tie bar fowels the gearbox?do i remove themand replace with a anti roll bar?
nova~norm
16-09-06, 01:12 PM
also does any 1 have a pic of the rear gear box mount as not to sure of fitting it
Cheers scott
craig green
16-09-06, 02:34 PM
No, you have to keep the tie bars. ARB is optional. If it just fouls a lug on the box, grind it off.
Rear box mount is the Nova one, Space it sideways so it lines up.
nova~norm
16-09-06, 02:37 PM
you are a star!i said that to my mate who was helping me last nite but he said that was bit rough!lol1 cheers craig u hnt happen to have a picture of tht mount fitted
?
craig green
16-09-06, 02:41 PM
No sorry. If you were to have it bolted to the box as per normal you would find it wont line up with the mount on the floor. So most fitting kits supply a spacer pack with longer bolts & shims so it can be spaced to fit.
Are you using a fitting kit or making it up as you go?
see; www.chrisastleymotorsport.co.uk (http://www.chrisastleymotorsport.co.uk)
nova~norm
16-09-06, 02:45 PM
got 1 from chris (above^)
all you need to make is some form off spacers or spaceing plate which is 1/2" /13mm thick and it will all fit
phil
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.