PDA

View Full Version : fiiting sri clocks to a spin



lj
15-09-06, 10:58 AM
been told to just run a wire from the coil if the green wire isn't preent in my car, what about volt meter? and oil pressure clocks? will the light come on when low on fuel?

novamadman
15-09-06, 03:47 PM
been told to just run a wire from the coil if the green wire isn't preent in my car, what about volt meter? and oil pressure clocks? will the light come on when low on fuel?

the green wire "should" be there if not yes just run it from coil, sri clocks only have a light for oil pressure and just works though plug, yes the light will come on when low on fuel

shane

lj
15-09-06, 03:49 PM
should all work then....

novamadman
15-09-06, 03:50 PM
should all work then....

yup only hassle you could have is the green wire.

make sure to run the speedo cable towards the pass side of car, around bit of the shell that holds dash otherwise you will never get the clocks back in - believe me i tried, just move it around the bit of the shell - youll see what i mean when the clocks are out

shane

lj
15-09-06, 04:38 PM
rev counters not working any ideas?

minjes been converted to a carb dizzy along with 14nv lump.... anyone?

philly
15-09-06, 04:53 PM
does it work/ jump if you press the horn?

lj
16-09-06, 12:08 PM
sorted...just run a new wire for them! works fine about from the fact that the cams made it go off the clock

chimp007_uk
16-09-06, 12:13 PM
did you run it to the neg or pos of the coil? for the tacho

lj
17-09-06, 09:02 AM
pass.... just run a cable from the green wire on the coil to green wire on clocks... works ok