nitros kit

[Anonymous]

im thinkin of gettin a nitros kit for my sr ive got twin 40's,b+head cam 4branch etc and it is very rapid kickin out 114bhp at the wheels but i want to get more so i can keep up wiv this gti-r cause hes a dick and id love to c his face when this nova is keepin up wiv him has any1 done itand how hard r they to fit how much did it cost and what sort of diff did it make cause there meant to pull u back loads cheers

[Anonymous]

Its gonna be a fecker with twin 40`s. You need to make sure each intake gets the same amount of gas. Youd have to use a common airbox for the carbs, which would reduce power output when you are not using the gas. I`ve fitted these kit before, and you need ?500-600 for a basic kit. When armed, on full throttle, a micro switch opens two solenoid valve, one for gas, and the other for extra fuel so you dont run lean. Its piss easy to fit on a normal motor.

Whoopass! :D

[Anonymous]

mm, if ur gettin 114 out of ur 1.4 id be happy, y not get a 1.6 and put 40's on that?
if u try and squeeze more out of ur 1.4 its not gonna last long!
I think no more than a 50bhp kit however u go about it!!

Dicko

[Anonymous]

If he swaps to a 1600, all the work on head etc. is lost!

Whoopass! :D

[Anonymous]

say bye to ur insurance though!!

[Anonymous]

im doin the same to my 20l 8v with a 25bhp kit from highpower for ?469 + vat but to be safe i wouldnt go over that:d

[Anonymous]

im gettin mine from high power but its costin me ?585 cause ill need 4 n20 injectors because of me twin 40's

[Anonymous]

u wanna be careful mate. what kind of nick is your motor in? if its shagged then dont bother cause your engine wont hack it. u need to be careful when applying the nitros aswell. at low revs it has been known for drive shafts to snap. dont tell the insurance company and dont crash!