bike throttle bodies

[vector1276]

been offered some 750 bike throttle bodies to fit a c20xe wondered if anyone has fitted similar what they run like etc cheers:confused:

[chimp007_uk]

not sure for the c20xe, but my bro is running 4 r1 bike carbs on his 2.1 pinto in his kit car. 40mm choke bike carbs are the equivalent to 45 webers...

[Martin]

600cc and above are fine i tink.. just need a manifold makingup.. see Bogg Bros

[mikey14sr]

the standard ecu probably wont be able to cope with the extra air going through bike bodies, so you'll be needing a complete ecu and management system to go with them.

[Stuart]

the std ecu will not be useable i guaruntee it!

you need aftermarket

[Martin]

the std ecu will not be useable i guaruntee it!

you need aftermarket

what would you sugest stu?

[chimp007_uk]

use bike carbs instead... no ecu needed at all! as said before, bogg bros are the people to see.

[draper]

ive been talking to a guy who says bogg brothers quoted him ?320 for manifold and carbs......... what else is actually needed ?

im still unsure wether to have them or not

[Martin]

i got told 500 drive in drive out everythig suplied and fitted by them.. then ?60 for a set up on RR

[ade]

this months TV has a nova running bike carbs...

[Stuart]

even with carbs you'd still need to sort the ign out and the std ecu will run home to mummy with the intake removed.. so you'll need a dizzy setup or IGN only ecu...

i will only recomend ecus that the RR you intend to use can setup.

[chimp007_uk]

good point, obviously on my bro's kit car it's a pinto with a twin choke carb so with a race distributor so therefore no need to change it. i spoke to him last night and he's going to drive the car to bogg bros and then fit the carbs and get them rr tuned. will probably be in the next 3weeks, as soon as he gets his sump back, he's having it shortened.