Switch panel

[Matt2107]

Need a bit of space for some toggle switches so knocked this up

http://img.photobucket.com/albums/v315/Matt2107/switchpanel.jpg

Needs a bit of a polish. :thumb:

Only downside is no space for the mobile.

[Ste L]

looks alright that

[draper]

looks good mate, whats the centre made from ? could always put some other dials in there ? i always put my mobile above the fusebox on that little shelf

[Matt2107]

bit of aluminium.

B&Q sell it fairly cheaply.

I'm gonna fit a blade fuse box in the top bit hidden away and the bottom is have the eject button and on off switch from the xbox. Gonna cut it off the front then extend the wires from the front passenger parcel shelf.

Xbox is gonna be mounted without a case with the front faced off with more aluminium with just a slot for the drive.

Toggle switches are gonna go at the top for some rear leds in the boot grab handle, front fogs, and interior neons, tv screen and secret front mounted spy cam ;)

[draper]

ejector seat button lol

[Matt2107]

lol why not I've got the space.

Tyre deflating tacks and smoke screen need adding too.

[draper]

smoke screen = typical nova !!

[Matt2107]

lol didnt think about that.. already got one of them.

It works even better if you fit the wrong oil filter and then hammer it to 90mph. (not that i condone speeding on a highway)

It shoots off better than an israel rocket propelled grenade.

[ade]

what kind of mobile you got? Cut a slot in the bottom area and stick the mobile into it - get a cradle for it and graft the cradle to the underside of the console - so the mobile slots in and slots out...

[Matt2107]

what kind of mobile you got? Cut a slot in the bottom area and stick the mobile into it - get a cradle for it and graft the cradle to the underside of the console - so the mobile slots in and slots out...

Ade... that is a quality idea.

[dannyb]

Around town, my girlfriend takes care of and answers my phone, or its left on the seat. On a long journey where theres not so much wheel twirling, I stuff it in the steering wheel:

http://i74.photobucket.com/albums/i246/dannyblo/DSC_0007.jpg

[richi]

u will have to post some new pics up when its done but sounds ike its gona look mint

[Matt2107]

Slight update on the switch panel.
I butchered my xbox and have got the eject button an on button panel off.
I need to extend the wires but I'm gonna fit it below the electric window switches and underneath that I'm gonna have the four xbox controller leads coming out.

Pictures will follow soon.

[Matt2107]

A little progress with my switch panel.

Xbox is stripped down and removed of plastic casing.
On off and eject button have been taken apart and I've also cut the original plastic part of the switch out the front of the xbox for mounting in my aluminium switch panel.
http://img.photobucket.com/albums/v315/Matt2107/Picture028.jpg

http://img.photobucket.com/albums/v315/Matt2107/Picture029.jpg

Now need to find some gromets the right size and extension leads for the controllers.