View Full Version : exhaust system for nova c20xe
nyabinghi
17-07-06, 12:55 PM
hi,
I live in France and I have a 2Ltr 16v nova but still running a 42mm bore stainless exhaust. The engine is not tuned.
When I was looking for a bigger exhaust I found this one (http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=8066371582&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1)
The seller said that this exhaust is 51mm bore, so I bought it.
I have received my exhaust but after measuring I find it is 45<->48mm bore:cry:
Before I resell this exhaust I would like to know what bore is better for a c20xe nova ?
So what do you advise me ? reselling the mongoose exhaust buy a bigger one ? Keep the mongoose ?
thanks
I think the standard GM exhaust bore is 2"(about 50mm), so i'd stick to that on a standard engine.
scott.parker
17-07-06, 01:12 PM
Im runing a xe on tb's using a 2" system 50.8-51mm..
And feels held back slightly still..
I have a new system im puttin on it thats a 2.1/4" 58mm..
I my self would advise you to run no smaller then the 2"-51mm
So either send the system back or sell it on mate.
Scott
Even 1200cc engines have a 45mm(1 3/4") bore, so thats going to choke your XE.
nyabinghi
17-07-06, 02:17 PM
OK,
so scott, with a standard engine you advise me to put at least a 2" (51mm)
That's what I think too, but the seller of the mongoose exhaust give me a wrong information.
What is the brand of your 58mm exhaust? where did you buy it?
scott.parker
17-07-06, 02:39 PM
OK,
so scott, with a standard engine you advise me to put at least a 2" (51mm)
That's what I think too, but the seller of the mongoose exhaust give me a wrong information.
What is the brand of your 58mm exhaust? where did you buy it?
I bought it off a mate it's second hand..
It's a full JP system,they are a custom exhaust maker in the UK.
That's the best idea if you ask me,look for either a 2nd hand system thats already been on a nova "cosa in france"
Or try to find out where your nearest custom system makers are over there.
Scott
Thread hi-jack : Wanna sell your system Scott? ;)
You can buy a Magnex system for a GTE/GSi, these use 2" pipework & fit perfectly, ideal for a 2.0 16v
I think ashley also do a cheap 2 1/4" (58mm) system
my old XE was on a standard nova GTE exhaust system and i alwys felt it could give more, shame it rusted away before i got chance to replace it !!
nyabinghi
19-07-06, 09:50 PM
You can buy a Magnex system for a GTE/GSi, these use 2" pipework & fit perfectly, ideal for a 2.0 16v
Ok, i beleived the mongoose one was 2" too, before I buy it
That's the best idea if you ask me,look for either a 2nd hand system thats already been on a nova "cosa in france"
In France there aren't enough tuned corsa A :(
Very hard to find a 2nd hand exhaust
correct size for an xe seems to be 2 1/4" my car had this size on it when it had the xe in, was also from jp:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.