Welsh Dan
09-06-06, 09:28 PM
Firstly, this engine is free to anyone that wants to collect it (from Wrexham).
Secondly, heres the pictures:
http://www.xen0phobiak.f2s.com/novaload/forsale/manifold.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/block.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/head_top.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/head_bottom.jpg
Lastly, heres the reason/story:
The engine was "a good runner" until the cambelt went around 86k miles not so long ago, and was in a mark2 astra. The astra was given to a friend of mine for him to get any parts off that he needed for his mark 2 astra, and he gave me (most of) the engine. My plan was to repair the head, tune the engine a little and replace the 1.2 with it, but I still live at my parents and they want it gone out of the garage.
The code on the block seems to read C14NZ after a bit of a clean, I couldnt get a clear pic sorry, however we thought it was a 14NV (1.4 SR engine), because it had a carb (the C14NZ is supposed to be single point injection according to here (http://s9.invisionfree.com/oldskoolvauxhalls/index.php?showtopic=22)).
The valves need reseating, it needs a cam, cam housing/carrier, rocker cover, head gasket, rocker cover gasket and cambelt then it should run.
I don't want anything for it, I'd rather see it put to use than scrapped, I won't post it, but I could meet anyone partway if they cover fuel costs.
Secondly, heres the pictures:
http://www.xen0phobiak.f2s.com/novaload/forsale/manifold.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/block.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/head_top.jpg
http://www.xen0phobiak.f2s.com/novaload/forsale/head_bottom.jpg
Lastly, heres the reason/story:
The engine was "a good runner" until the cambelt went around 86k miles not so long ago, and was in a mark2 astra. The astra was given to a friend of mine for him to get any parts off that he needed for his mark 2 astra, and he gave me (most of) the engine. My plan was to repair the head, tune the engine a little and replace the 1.2 with it, but I still live at my parents and they want it gone out of the garage.
The code on the block seems to read C14NZ after a bit of a clean, I couldnt get a clear pic sorry, however we thought it was a 14NV (1.4 SR engine), because it had a carb (the C14NZ is supposed to be single point injection according to here (http://s9.invisionfree.com/oldskoolvauxhalls/index.php?showtopic=22)).
The valves need reseating, it needs a cam, cam housing/carrier, rocker cover, head gasket, rocker cover gasket and cambelt then it should run.
I don't want anything for it, I'd rather see it put to use than scrapped, I won't post it, but I could meet anyone partway if they cover fuel costs.