View Full Version : cut out
I replaced the ht leads on me 1.2 nova cause i snapped on in half like a d**k. Now when i start the beast it turns over and starts thewn just cuts out unless i put the pedal down then it starts. i have made sure the leads are tight. any1 no whats up gona b me being rubbish:cry: i no thanks:thumb: ppl
Are the leads on the dizzy in the right order?
yeah took them all out 1 by 1, its only doing it some times now
SRI crazy
07-06-06, 11:13 PM
did u take the cap off. make sure the lead frm the coil is on tight
Welsh Dan
07-06-06, 11:32 PM
Give the connectors on the heatshield/adapter thingies a quick clean with a wire brush, consider changing the plugs, dizzy cap and rotor arm aswell while you're at it.
i had this on my SR, i changed the plugs, leads, dizzy cap, dizzy assembly, fuel pump & filter and tank, had carb jetted and fuel lines cleaned out! and it turned out that my airfilter was that filthy anything over 60mph the engine would stall!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.