View Full Version : F13 on c16xe
General Baxter
07-06-06, 06:38 PM
will it go, what mods are needed?
afaik straight on no mods
dhdev (Oli)
07-06-06, 06:51 PM
I'm not 100% sure but i believe the pot type flywheel that comes on the c16xe fouls the box, I run a c16xe with f13 and use a nova flywheel and clutch tho, works fine. The bonus is that the nova flywheel is about half the bloomin weight of the corsa one! :D
General Baxter
07-06-06, 06:53 PM
well im going from a 1.2 to a 1.6 16v, will the fly wheel and clutch fit off that on to the 16v engine?
only ask as my F13 on my 1.2 is rather special its worth more than the car lol
its not a straight cut close ratio beast is it?
General Baxter
07-06-06, 06:59 PM
nar not that good lol
but its special to me
dhdev (Oli)
07-06-06, 06:59 PM
Honest answer is i don't know.
I was told nova flywheels don't fit, which was wrong as i fitted a nova flywheel to mine lol! think mine was off a 1.4 iirc.
Sorry i can't be more specific/helpful:tard:
It will bolt straight on... I have an F13 on mine
:)
craig green
08-06-06, 02:42 PM
spare 1.6 GTE flywheel here.
CG
General Baxter
10-06-06, 09:44 PM
just took off the F15 box, bloody hell that fly wheel is big, and it dont look like a F13 will fit,
any mods i need to do? or will the F13 slider over that massive flywheel and clutch?
Novasport
10-06-06, 09:51 PM
Stick to the F15 it has better ratios and can handle more power. Unless your F13 is straight cut I wouldn't bother swapping.
General Baxter
10-06-06, 10:24 PM
will the F13 drive shafts fit in the F15 tho?
+ i would like to keep my F13 as its got a ATB and 4.18FD
Yes shafts will fit fine.
the f15 ratios are only slightly different to the F13 ones... (well the early F15's anyway)
General Baxter
11-06-06, 10:08 AM
mines an x16xe lol opps
General Baxter
11-06-06, 11:51 AM
Yes shafts will fit fine.
hold the fudge on!
you told me when i was going to fit the F15 off the 1.7TD engine into my nova, ill need large block driveshafts, now your saying i dont :roll:
i know you dont need big block shafts!
General Baxter
11-06-06, 12:11 PM
duh adam im gunna bum ya! lol
ill pop the F15 back on the and sell the F13 :)
i think the diffs are interchangable aswell
should be. but the FD isnt ;)
hold the fudge on!
you told me when i was going to fit the F15 off the 1.7TD engine into my nova, ill need large block driveshafts, now your saying i dont :roll:
Well no, you told me you had a f18/f17 cant remember which, gearbox on the TD.
Thats a big block box that would need big block cv's etc.
F15 is a small block box :roll: lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.