GSI clocks into standard nova

[novamadman]

anything different

any wires to run for anything

thanks shane

[Welsh Dan]

If you dont have an oil pressure sensor you'll need to fit one, the green wire taped up behind the dash is for the tach if i remember corectly.

[Adam]

Ye, as above.
The tacho wire should be already in the clock plug.
If not, you'll have to wire one yourself.

You will need a two pin oil sender for the pressure guage, the wire for it should be taped up with the clocks plug.

[loggyboy]

Also depends on what phase the nova is - mk1 wont suit mk2 and vice versa

so if u have a mk1 get some SR or GTE dials.