mark1 clocks in a mark2 nova and one no wiring or got diagram

[gaskell63]

ive got a standard set of mark 1 nova clocks my nova is a mark2 is there any chance i can put mark1 clocks in a mark2 if yes do you no the right wiring or how to do it i heard off a friend that someone has once asked this question before on here and there was a diagram and everything thanks

[Stuart]

haynes wiring diagrams are good for a start..

[gaskell63]

its not in the haynes manual well i cant find out anyway

[Jack]

Its in the back, the electrical diagrams!

Don't Mk2 have a 14-pin plug and Mk1 a 12-pin (or whichever way round it is)? Or is that just between rev counter models and poverty spec dials...

[bump]

Mk1 and Mk2 Plugs are different but same across different models. If you can get a Mk2 plug from a scrappy chop that in and follow the haynes diagram for wiring though IIRC it's a colour for colour job.

[Ste L]

shouldn't been to chop, should be able to get the pins out of the plug easy enough, and just swap them into the mk2 plug