View Full Version : 1.3 sr gearbox in 1.2spi?
richardsneddon
10-04-06, 04:36 PM
could i put a gearbox out of a 1.3 sr in a 1.2spi?
craig green
10-04-06, 05:06 PM
Yep
richardsneddon
10-04-06, 06:13 PM
would it make a difference on performance being closer ratio gears???
You don't exactly have close ratios in the 1.3SR box. your final drive ratio is higher. It will let accelarate a little faster and maybe lose a couple of MPH at the top. Definatly worth doing though if you can get one cheap.
richardsneddon
10-04-06, 06:28 PM
cool how hard to change a gear box?
Depends on space, equipment and pairs of hands available. It took me and my dad a Sunday afternoon and then finished up with the fiddley bits like gear linkage setup on a monday evening.
To get it done quick get a mate to help, put the car on axle stands and use 2 jacks if you can (one to support the engine and one to lower the box). Give your self a weekend, take your time and follow the Haynes manual.
If only it was as simple as WRC teams, 20 minutes to fit a new box!!!
richardsneddon
10-04-06, 07:20 PM
Ill have a look in haynes see what its like
haynes isnt 100% accurate for box swapping. but you should get the idea :D
studaman21
10-04-06, 08:25 PM
am i right in saying you have to change or modify the selector too due to the conversion from 4 speed in the spi to 5 speed box
/\
Some people have, but some haven't.
You have to a cut a little lug off the stick that stops it going into the 5th position.
richardsneddon
11-04-06, 12:16 PM
Its Already Got A Five Speed In It.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.