electrical gauges

[graham kirkbride]

Hi lads!!! I want to fit a ,oil pressure gauge , oil tempreture gauge,and ,water temp gauge, to my early 20xe and was just wondering how to wire them up .They are made by auto gauge, Were do i put the senders etc regards graham

[R1CH]

http://www.migweb.co.uk/forums/showthread.php?t=171368&highlight=senders

Have a look thru that, should find everything you need to know !!
:thumb:

Rich

[JSeymour]

does it not say on the instructions? you can find water temp(i think) and oil pressure in the haynes manual.

[graham kirkbride]

Nice one lads!!!! cheers for your help.

[The Simps]

You won't be able to use the existing senders as the signals are different. You will need the right ones for the guages.

Oil ones as per Oddballs post above on Migweb.

For the water temp guage I tapped a hole in the thermostat housing. Hang on I'll get a pic!

Simps.

[The Simps]

I got mine done at the local machine shop. Only cost a few quid. Also, because its after the thermostat and very close to the factory one it should give a similar reading to the one on your dash.

http://img.photobucket.com/albums/v310/TheSimps/Nova/Mechanical/Stat1.jpg
http://img.photobucket.com/albums/v310/TheSimps/Nova/Mechanical/Stat2.jpg

Simps.

[graham kirkbride]

nice one lads thanks