Pic request - 1.3, 1.4 inlet manifolds

[GavCorsa]

Have seen them on here somewhere before
Been looking at loads of old threads but can't find them
Just need pics of the mounting face
need to compare with what my mate has to see if it fits on my car (1.2 carb)
He has inlet manifold with a webber carb, wondering if it will fit mine

Thanx

[Adam]

1.3 is the same as 1.2.

1.4 has square ports.
I'll look for some pics.

[Adam]

1.3/1.3-
http://img.photobucket.com/albums/v86/Nova-crew/1300srinlet.jpg

1.4 Sr/SPi-
http://img.photobucket.com/albums/v86/Nova-crew/1400portshape.jpg

[bonkars]

hi was just wondering if this will fit my 1.6 i have been lookin for 1 for about a year and still no joy if any 1 has 1 for sale could you let me no cheers

[mikey14sr]

bonkars, the 1.2/1.3 manifold will bolt on but the port shape is wrong, the sri/gte/gsi have round inlet ports.

[Jon_nova1]

you've been looking for an inlet for a 1.6?? only the multipoint injection would work, if the bolt holes for a 1.2 match up you might be able to port the 1.6 head to match the inlet manifold??

[mikey14sr]

you've been looking for an inlet for a 1.6?? only the multipoint injection would work, if the bolt holes for a 1.2 match up you might be able to port the 1.6 head to match the inlet manifold??

But if it's a round port head thats the last thing you want to be doing, as the round ports flow so much better than the cathederal ones. The way to do it is to make the manifold ports match the head, but it is quite a tricky job to do, as it involves welding extra material into the manfiold. If you can afford it, the best option for running a round port head on a carb set-up, is to go for twin 40's with a round port manifold.

[Jon_nova1]

the cethedral ports are bigger than the round ones, but i can't disagree, its just if your willing to do the work

[Adam]

Bigger is not always better ;)

The cathedral ports only open to cathedral at the end of the runner, the rest of the runner is round.