mikey14sr
22-03-06, 03:48 PM
Thought I'd do a little guide to the standard cams, Figures are taken from the green version of the Haynes manual.
1.2 carb/12st,
Inlet lift 5.1mm
exhaust lift 5.5mm
1.2spi/C12NZ,
Inlet lift 4.7mm
Exhaust lift 5.1mm
1.3 carb/13sb,
Inlet lift 6.0mm
Exhaust lift 6.0mm
1.4 carb/14NV,
Inlet lift 6.12mm
Exhaust lift 6.12mm
1.4spi/C14NZ,
Inlet lift 5.2mm
Exhaust lift 5.6mm
1.4mpi/C14SE,
Inlet lift ??mm
Exhaust lift ??mm
1.6mpi/E16SE,
Inlet lift 5.61mm
Exhaust lift 6.12mm
C16SE same as E16SE.
If anyone has details of any cam not listed let me know and I'll add it in.
1.2 carb/12st,
Inlet lift 5.1mm
exhaust lift 5.5mm
1.2spi/C12NZ,
Inlet lift 4.7mm
Exhaust lift 5.1mm
1.3 carb/13sb,
Inlet lift 6.0mm
Exhaust lift 6.0mm
1.4 carb/14NV,
Inlet lift 6.12mm
Exhaust lift 6.12mm
1.4spi/C14NZ,
Inlet lift 5.2mm
Exhaust lift 5.6mm
1.4mpi/C14SE,
Inlet lift ??mm
Exhaust lift ??mm
1.6mpi/E16SE,
Inlet lift 5.61mm
Exhaust lift 6.12mm
C16SE same as E16SE.
If anyone has details of any cam not listed let me know and I'll add it in.