project wide ass

[knukkles]

the nova is coming allong very slowly but gettin their
soz about the link but this is what it looked like before i started the work with the wide arch and the new kit also no door handles
http://i49.photobucket.com/albums/f272/knukkles/Photo-0058.jpg

the work started on the rear arch first . the standard arch was cut back about 5inch up so i wauld have no trauble with clearence for the rims.
http://i49.photobucket.com/albums/f272/knukkles/DVC00081.jpg

the doors went to the bodyshop for the welding and smoothing to be done http://i49.photobucket.com/albums/f272/knukkles/DVC00098.jpg

whilst the doors were off at the bodyshop i flushed the boot and finished all the work on the rear arch
http://i49.photobucket.com/albums/f272/knukkles/DVC00151.jpg

after i did all i cauld do on the rear i started the repairing on the slam panel . i removed the old one and welded in a complete new front slam panel http://i49.photobucket.com/albums/f272/knukkles/DVC00066.jpg

i then decided to start the work on the front assembly of the wings and started the cutting and moulding the indicater holes for the front lights http://i49.photobucket.com/albums/f272/knukkles/DVC00093.jpg

i got the doors back and placed them on for a moc up they sit well and suit in with the smooth wide archeshttp://i49.photobucket.com/albums/f272/knukkles/DVC00079.jpg

i now need to wait for the rj automotive front to be delivered and then i can finish the rebuild ready for the respray i might spray it in rage eluision blue/red
or i might go fully customand have glacia white base coat and have blue/violet and purple pearlecent with a clear laquar that wauld look sweet

[jbowman]

Looking good, Im starting to like the wide arch kit more and more.
Hope to see more pics soon!

[TommySR]

looks promising, cant wait to see it done

[MrSilicone]

What size are those alloys? and how did u manage to get them sitting right with the wide arch kit???

are you using spacers? and whats the offset on the rims?

Thanks

[Give it some rev]

i like what you've done with the arches, dont like hat you've done on the front end but respect is due if you've carried out the work on it.

[knukkles]

the offset on the rims is 205/40 17in there is no spacers or any of that ive just lowered it 75mm on the rear and 55 on the front on custom springs and shocks

[knukkles]

what do you mean you dont like what ive done with the front need more imfo than that

[knukkles]

im getting rid of the alloys and putting them on a clio and getting some chrome 18inch beasts to go on when its been sprayed minta