hazard switch

[Anonymous]

Firstly, i plan to do the hazard switch mod, but i cant remeber how to, i no its a diode but what one, and which wire.

secondly, ive just installed an 8v digidash, everything works, but while car is in motion, the indicator relay clicks on and off and buzzes, if the indicators or hazards r put on it stops, is this bcos of the hazard switch hasnt had the mod done???

[Anonymous]

oh i meant to say it happens when the engine is on, the car dosent have to be in m,otion, just when the engines running, even if its just the ignition on, it dosent happen

[Anonymous]

The black wire to the switch, so you can`t supply power back down it. Suonds like you`ve got a tacho pulse feeding to the relay? or dodgy wiring?

[Anonymous]

SOLUTION!

well, i ran two wires from the indicator stalks, as the digital dash has a left and a right, this left the un used black/white wire from the old nova dash, it just so happens that the colour wire i used for the speed sender was black, and one black with white stripe to, so the negative wire from the speed sender was connected to the old nova indicator warning telltale, so there you have it

cheers guys

BUT! - stil havent done the security mod, i have a diode with a silver stripe on one end, which way round does it go?

[Anonymous]

Does the haxard switch trick still work if you've had a two point immobiliser fitted?
My alarm goes off when ever voltage changes NE way be it up or down.or usage so will i need to do it?

[Anonymous]

Does the haxard switch trick still work if you've had a two point immobiliser fitted?
My alarm goes off when ever voltage changes NE way be it up or down.or usage so will i need to do it?
:-/