View Full Version : newbie
dannyboy1986
16-02-06, 11:52 PM
hi, im new here!
i jus installed a new head unit, amp and sub in my beasty 1.2. but im havin a few probs, the amp n sub work fine when listening to the radio but as soon as i switch to CD the amp turns itself off and i get no sub!!!1
any suggestions?
cheers
danny
it would indicate that the amp is wired correctly as your getting it to run. try having the HU playing a cd and get a multimeter to test that your getting a 12v feed through the remote at the amp. if your not then i would suggest that the HU is shot.
cheers
Bump
Does the amp actually turn off? Or does the RCA output from the HU just drop right down?
Alright matey
Just out of interest can a low rca output from a HU be solved? i've never encountered it.
dannyboy1986
18-02-06, 10:33 PM
hey thanks for ur help guys, turns out it was jus a setting on the head unit!!! im such a dumbass!! now iv got a dodgy connection somewhere from when i put the head unit back in and now the head unit wont turn on!!!
one thing after another!
hey thanks for ur help guys, turns out it was jus a setting on the head unit!!!
Thats what I was getting at for the low RCA output ;)
Don't think that i've ever had a setting for the rca output on any of my HU's. I'll remember that for the future
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.