PDA

View Full Version : Fuel pressure



Clutch
06-02-06, 09:11 PM
Hello i have a tuned up nova GTE with EFi and my fuel pressure is at 2,5bar. With my FSE valve i can put some more pressure on, normally what?s the pressure used to a best performance?

More pressure means less top end?


Thanks very much

Stuart
06-02-06, 09:18 PM
erm well depends on what your exhaust gas is like...
IE you will need to have the FPR setup on a RR to make sure that your not overfuelling etc.

Clutch
06-02-06, 09:22 PM
ok
I will give 0.5 bar just to test and then i will see.
My exhaust system is a 4 into 1 manifold and a strait 48mm down pipe with a direct backbox.
I?m going to change the down pipe to 55mm.
About the camshaft i have a 280? schrink cam.

Stuart
06-02-06, 09:26 PM
the exhaust size has naff all to do with it lol.

i mean the exhaust gases (eg the CO and O2 levels) Have you got a lambda sensor? if so then the ecu will just fix the fuelling so you wont really see any gain from adding more fuel lol

Clutch
06-02-06, 09:33 PM
No i don?t have a lambda sensor.
It?s an E16SE engine.
About the CO numbers i don?t know but i can find out in the machine.