View Full Version : 2.0 8v non start, please help!!!
:mad:now then! ive just put a c20ne in a h plate salloon, the problem is it wont start. the fuel system pressurizes, the injectors are recieving their pulses, and theres a big spark, but it still wont start, please help as its doin my head in!
sloth:confused: :wall:
slammed saloon
05-02-06, 09:09 PM
timin ok? id check that first if you've got spark and fuel
took enguine out of a cav, twas runin, put it in, not stripped owt down like
slammed saloon
05-02-06, 09:46 PM
id still check it m8
jamie gsi16v
05-02-06, 11:15 PM
fuel lines on the right way round?
ones got silver circle thingy=feed, right?
uthers to the rail.
jamie gsi16v
06-02-06, 08:31 PM
ones got silver circle thingy=feed, right?
uthers to the rail.
????? ones feed ones return, simple. just swap em round and try it.
ones got silver circle thingy=feed, right?
uthers to the rail.
wrong way round mate
the feed goes to the rail and the circle thing your on about it the pressure regulator , that is the return :thumb:
tried it, it still wont run, ive connected the ECU as oer the valvers.com but what i think is the fuel pump relay isnt actovating i.e no feed etc...
p.s this is near the 3 little multiplugs near the ecu.
ta,
sloth
what engine was in the car originally ,
you said it the first post that the fuel system is pressured , so your fuel pump relay must be working
was a 1.2 carb. i wired the pump up 2 the ig switch as a test.
lol have you wired the ig live feed to the fuel pump relay then
if you have and your still not getting anything it could be the relay , can you change it for another
alos are you using the injection tank ?
very advisable
nope its a saloon so a gsi etc one wont fit, different filler pipe points, the pump was direct wired as a test. not the relay, soz 4 tha confusion
as far as i know the tank itself is the same ? thought it was only the feed to it that was different ?
can anybody else shed some light on this
i bought a gsi tank, and tool mine out, on the gsi, the pipes are at the side for the filler, but on mine they go out the back in the middle
It wont be a problem using a carb tank, the difference between them and an injection tank is they dont have an internal swirl pot, so you may experience some fuel surge on corners, but it wont effect the engine getting fuel!
One thing i hope you HAVE done is put the metal injection fuel lines in?
I assume the ECU is getting power?
the filler pipe is at the side yes ,and on a gsi tank the outlet to fuel pump is on the back in the middle , and the return is on the front in the middle
It wont be a problem using a carb tank, the difference between them and an injection tank is they dont have an internal swirl pot, so you may experience some fuel surge on corners, but it wont effect the engine getting fuel!
One thing i hope you HAVE done is put the metal injection fuel lines in?
I assume the ECU is getting power?
it will fella i know of a few people who have killed their XE's because the have ran carb tanks and when they have either ran low or heavy corners they have obviously ran lean and then just melted **** lol
yeah runin nu high pressure lines. how do i check the ecu then?
it will fella i know of a few people who have killed their XE's because the have ran carb tanks and when they have either ran low or heavy corners they have obviously ran lean and then just melted **** lol
Oh yeah, i agree it definately aint clever, I run a carb tank but with a duel pump system and a front mounted swirl pot lol.
i was just mentioning that that wouldnt be the cause of it not starting!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.