PDA

View Full Version : Spraying Rocker Cover


Anonymous
19-04-01, 02:09 PM
Hi Peeps

Im about to unbolt my rocker cover, and spray it in RED, *High Temp Spray Paint*, whats the best way to prepare the surface on the rocker cover?

Cheers for any help! :)
Anonymous
19-04-01, 04:47 PM
Use degeaser on it. It does what it says on the tin.

dan69_gsi@hotmail.com :p

dangsi@novaload.org.uk :>
______
=/__|__\?_
=|(_)___(_)\
Anonymous
19-04-01, 05:01 PM
And use wet n dry to smooth the surface.

=\_____
=/__|__\_
=|(_)___(_)\

Whoopass! :D
Anonymous
19-04-01, 06:09 PM
normal paint is fine mine has exactly same on engine as rest of car.

*************************
Innocent until proven guilty! X-(

Ian@novaload.net
*************************
Anonymous
08-06-01, 02:56 PM
ive done mine yellow,.. use gunk and a fine wire brush. then use a grey primer. then put your paint on.
Anonymous
08-06-01, 03:43 PM
When you remove the rocker cover do you need to get a new gasket and new bolts for it? or can you just put the old ones back if they look OK?

Mmmmm forbidden donut. :)
Anonymous
11-06-01, 01:54 PM
get a new gasket
bolts are ok to reuse
but y not get coloured ones??

--- Novaload technical support open 24hrs ---
--- Phone/SMS Support 24hrs ---
--- Workshop services 6pm - 11pm Mon - Fri, 9am - 11pm Sat/Sun ---
--- 16v engine fitting advice ---