Renault Alloys

[Tim]

hi all,

ive heard that is possible to fit new 4 stud renault alloys on a nova, im after a set of 16s?

Does any 1 know if they are going to rub the arches anywhere?

And any ideas of any other standard alloys that would fit and cause no probs in a 195/45/16 fitment

cheers lads

tim

[Philsutton]

i would say they'd rub to fuck, being french they prob have an offset of 259, 16s normally rub unless they are the correct fitment.

[Tim]

i was told that if u space them out on the back the they will be ok, its the fronts im concermed about, and the off set is apparently 50mm

[Jack]

If the offset is 50mm thats a good fit - novas are et49.

[orange_andy]

on that note, anyone know if alloys i just took of my sr would go onto a renault 5crappy normall 1.2 1.4 what ever they are

[j1400]

Both vx and renaults have 4x100 PCD so they fit, but the offset is different, think it's ET38 on renaults, you'll find the rer archs will rub a bit depending on how low it is, but you can pull them out to fit, seen phase 1 clio 16v on nova's before looks quite nice imo.

[Jack]

My 15" Oz wheels were et38. Stuck out a bit on the front, but rear was ok on 50mm drop with no back seats and rolled arches.

[Ste L]

the new renault wheels are virtually the same offset as vauxhall, so they should fit

[JAMIEP]

I tried 15s off a renault on mine and they stuck out a fair bit.....the offset must be way off cos so do my 17s

[Ste L]

old renault or new...

mate had some new 16" clio/megan wheels, and they fitted fine on his

[Tim]

cheers for all the help









6555555555555555555555555555555555555