View Full Version : Renault Alloys
hi all,
ive heard that is possible to fit new 4 stud renault alloys on a nova, im after a set of 16s?
Does any 1 know if they are going to rub the arches anywhere?
And any ideas of any other standard alloys that would fit and cause no probs in a 195/45/16 fitment
cheers lads
tim
Philsutton
08-01-06, 06:22 PM
i would say they'd rub to fuck, being french they prob have an offset of 259, 16s normally rub unless they are the correct fitment.
i was told that if u space them out on the back the they will be ok, its the fronts im concermed about, and the off set is apparently 50mm
If the offset is 50mm thats a good fit - novas are et49.
orange_andy
08-01-06, 08:09 PM
on that note, anyone know if alloys i just took of my sr would go onto a renault 5crappy normall 1.2 1.4 what ever they are
Both vx and renaults have 4x100 PCD so they fit, but the offset is different, think it's ET38 on renaults, you'll find the rer archs will rub a bit depending on how low it is, but you can pull them out to fit, seen phase 1 clio 16v on nova's before looks quite nice imo.
My 15" Oz wheels were et38. Stuck out a bit on the front, but rear was ok on 50mm drop with no back seats and rolled arches.
the new renault wheels are virtually the same offset as vauxhall, so they should fit
I tried 15s off a renault on mine and they stuck out a fair bit.....the offset must be way off cos so do my 17s
old renault or new...
mate had some new 16" clio/megan wheels, and they fitted fine on his
cheers for all the help
6555555555555555555555555555555555555
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.