View Full Version : Speedo sender
can anyone tell me how to remove the speedo sender on the nova gearbox? theres a 10mm bolt which holds a plate into the sender, but when you take that off the sender doenst move still!
any help appriciated
cheers ben
yer could also do with knowing this. havent actually tried yet but would like to know incase i have the same problem.
cheers, lew
lee 16v
01-01-06, 02:16 PM
can i ask why you would want to do this are you fitting a digi dash because you dont need to change that, or is it not working?
i think you need to take the box off and take it apart BUT i might be wrong try mig web some1 on there will no.
just undo the 10mm and give it a good pull and it will come out.
i couldn't get the cable to screw on, i thought the thread might be fucked but it was ok.
anyway thats how i got it out. it was a plastic one tho, i tried for quite a while to get a metal 1 out and that wasn't going anywhere
you don't need to actually remove the whole sender.
When fitting my digidash i just unscrewed the top of thesendor, and screwed the new sender top onto that.
works fine. but yes sometimes they get a little stuck - just have to give them a yank
yea but i had to because i thought the thread was buggered as the normal speedo cable wouldn't line up on the thread.
i wasn't fitting a digidash
take the bolt out, get a stubby flat screwdriver under the plastic and lever that fooker out
Philsutton
02-01-06, 11:59 AM
right to put things straight the normal speedo cable one is too thin to screw onto the digi one, doesnt make sense but it is. I told you to hit it with a hammer to get it out :lol:
right to put things straight the normal speedo cable one is too thin to screw onto the digi one, doesnt make sense but it is. I told you to hit it with a hammer to get it out :lol:
no they are the same phil :P
i took it out and fit straght away
Philsutton
02-01-06, 11:20 PM
i hate novas, they are crap
yea but i had to because i thought the thread was buggered as the normal speedo cable wouldn't line up on the thread.
i wasn't fitting a digidash
apologies, wasn't very clear in the first place. but at least if you do fit a digidash you'l know not to remove the whole thing again (they sometimes pop straight out, sometimes they are bloody hard)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.