View Full Version : cylinder pressures
getlost29
31-12-05, 06:11 PM
has any one got the standard manufacture cylinder pressures for a c12nz (1.2 spi) engine just want to check against mine they came out as
cyl1 = 12.8bar
cyl2 = 13 bar
cyl3 = 13bar
cyl4 = 12.8bar
cheers
seem fairly even... therefore "ok"
did you do a wet and dry test?
getlost29
31-12-05, 06:15 PM
did a dry test, but as sson a i saw they were high thught ther was no point in doin a wet, its not buring oil, plugs have a nice biscuit colour to em
the engine runs great only done 60000 in a kreg nova
was just interstead in seeing what the pressures where when i was changing the plugs
may do a wet test if they are difrent to the standard pressures
i dont recal ever seeing std pressure readings....
i assume you had the throttle WOT ;) high pressure and good running is perfect :D well done
getlost29
31-12-05, 06:21 PM
yep had the throttle wide open, and did the test twice to make sure they were correct
there you go then, you have your std pressure readings ;)
i think its 13bar for atandard pressure. iirc
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.