t 40 advise

[womble sri]

i am currently running t40 sr but have just got the multi point injection head, had it skimmed got the inlet manifold and piper bp 300 cam kit. which dizzy should i use the original sr one or the one from the muti point injection head also are the vernier for the sr and the sri the same and would it matter if a had a kent vernier with a piper cam
thanx neil

[Adam]

The dizzy from a MPI setup wont work with carbs.
Use the 1400SR dizzy/coil.

[womble sri]

ok cheers what about the vernier it shouldnt matter about mixing manufactures should it i thought they were the same size and fitment but wasnt sure if there was a difference in how it will run

[Stuart]

as long as the teeth for your crank pulley/waterpump/cam pulley are the same then tis fine.

use the sri head, sri inlet, SR dizzy/coil/module and away you go :D

once setup i want a go in it lol

[womble sri]

yeah should be finished for end of january just wilshers are a bit busy at the mo so not sure when ill be able to get the carbs set up