toon_army2k2
26-12-05, 10:36 AM
Loads of spec, good all round condition, M reg, 3 owners from new, 9months MOT, 2/3 months TAX, loads of history and recipts, got ?1900 worth of recipts from the past year, puma 15" alloys, c/l, sun roof, engine has high spec see below, PAS, ABS etc etc.
?1400ono
E-mail me if you want full spec or pictures, thanks.
toon_army2k2@yahoo.co.uk
No timewasters
May p/x why
1995 M Reg 3dr Si...
Engine;
1.6 Zetec lump bored to 1750cc,
Skimmed pistons for correct compression ratio,
APR forged rod bolts,
Polished and ported gas flowed head,
Copper gaskets,
2 litre MAF sensor,
2 litre throttle body,
Custom SCC performance exhaust,
Piper fast road cams (custom profile)
XR3i 130 spec crack case with oil injector,
Standalone OMEX Ecu with Weber Alpha Platinum ignition system
3 angle valve seats,
EGR valves removed,
2x Bosch 044 fuel pumps,
Cosworth fuel pressure regulator,
Vernier pullies,
Hi flow cat,
APR oil and water coolers (needs to be fitted),
Vibratechnics engine mount,
Techniclutch and cover,
MXT75 gearbox with Quaiffe ATB diff which needs to be fitted.
Engine Detailing;
Chrome PAS tank cap
Chrome header tank cap,
Chrome suspension nut covers,
Chrome suspension tops,
Chrome brake reservior cover,
Chrome MAF cover,
Chrome washer bottle cover,
Chrome spark lead cover,
Custom rocker cover in red and blue,
Polished RST charge carrier pipe,
Custom exhaust heat shield,
Anodised red oil cap,
Chrome bonnet stay.
Suspension;
Lowered -60mm on KYB gas shocks and Spax springs,
Polybushed all round,
Ford Motorcraft upper strut brace.
Bodywork and Exterior;
Resprayed in April in Noveau red but made slightly lighter in colour,
Aerial removed,
Rub strips removed,
Passenger door lock removed,
Tailgate lock strip removed,
RS factory fit bodykit,
Smoked side repeaters,
Mazda style rear lights in black,
Mirror base plates colour coded,
Bonnet raisers (to help aid cooling on engine).
Brakes;
RS2000 front brakes,
Standard rear drums.
Interior;
Standard seats,
Race X Volt Gauge,
Race X Vacuum Gauge,
Carbon Pillar pod,
Pearlescent gear knob,
Custom stainless gearbox plate and electric window switch plate.
http://img.photobucket.com/albums/v666/si_sean/atdonny2.jpg
http://img.photobucket.com/albums/v666/si_sean/IMG_6033.jpg
http://img.photobucket.com/albums/v151/keanut/DSCI0019.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY3.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY4.jpg
http://www.geordiesatheart.co.uk/FITP/markseaninfront.jpg
?1400ono
E-mail me if you want full spec or pictures, thanks.
toon_army2k2@yahoo.co.uk
No timewasters
May p/x why
1995 M Reg 3dr Si...
Engine;
1.6 Zetec lump bored to 1750cc,
Skimmed pistons for correct compression ratio,
APR forged rod bolts,
Polished and ported gas flowed head,
Copper gaskets,
2 litre MAF sensor,
2 litre throttle body,
Custom SCC performance exhaust,
Piper fast road cams (custom profile)
XR3i 130 spec crack case with oil injector,
Standalone OMEX Ecu with Weber Alpha Platinum ignition system
3 angle valve seats,
EGR valves removed,
2x Bosch 044 fuel pumps,
Cosworth fuel pressure regulator,
Vernier pullies,
Hi flow cat,
APR oil and water coolers (needs to be fitted),
Vibratechnics engine mount,
Techniclutch and cover,
MXT75 gearbox with Quaiffe ATB diff which needs to be fitted.
Engine Detailing;
Chrome PAS tank cap
Chrome header tank cap,
Chrome suspension nut covers,
Chrome suspension tops,
Chrome brake reservior cover,
Chrome MAF cover,
Chrome washer bottle cover,
Chrome spark lead cover,
Custom rocker cover in red and blue,
Polished RST charge carrier pipe,
Custom exhaust heat shield,
Anodised red oil cap,
Chrome bonnet stay.
Suspension;
Lowered -60mm on KYB gas shocks and Spax springs,
Polybushed all round,
Ford Motorcraft upper strut brace.
Bodywork and Exterior;
Resprayed in April in Noveau red but made slightly lighter in colour,
Aerial removed,
Rub strips removed,
Passenger door lock removed,
Tailgate lock strip removed,
RS factory fit bodykit,
Smoked side repeaters,
Mazda style rear lights in black,
Mirror base plates colour coded,
Bonnet raisers (to help aid cooling on engine).
Brakes;
RS2000 front brakes,
Standard rear drums.
Interior;
Standard seats,
Race X Volt Gauge,
Race X Vacuum Gauge,
Carbon Pillar pod,
Pearlescent gear knob,
Custom stainless gearbox plate and electric window switch plate.
http://img.photobucket.com/albums/v666/si_sean/atdonny2.jpg
http://img.photobucket.com/albums/v666/si_sean/IMG_6033.jpg
http://img.photobucket.com/albums/v151/keanut/DSCI0019.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY3.jpg
http://img.photobucket.com/albums/v666/si_sean/ATDONNY4.jpg
http://www.geordiesatheart.co.uk/FITP/markseaninfront.jpg