Twin 45s Help

[Stoo]

Right, need info please peeps!!

Im ditching the standard injection off my 20 XE and im gonna run Twin 45 webers.

I have
Carbs, inlet manifold, 1.6 dizzy , coil, etc

I need to know exatcly waht i need to ditch loom wise, what to do with the fuel lines, how the ignition is taken care of etc etc

All help greatly appreciated!

[Lee H]

Remove all the XE loom and ECU as you don't need any of it.

Can use one of the standard lines under the car for fuel feed, I never ran a return. You will need a facet low pressure fuel pump and a fuel pressure regulator.

the dizzy will need to be off an old 1.6 carb Cavalier and also need the piece of loom between that and the coil to suit then there is just 3 wires off that for earth, switched live and rev counter. Thats the wiring done then.

Did all this not so long ago with the carbs I bought off Sean but sold the carbs last week.

If you need any more help get my number off Riggy, Rexy or Sean and I can explain better over the phone.