rear brake bias & lines

[craig green]

Can I run the rear brakes of one outlet of the master cylinder? then plug the vacant outlet.

T peice each individual caliper off the (single) main hose Then use a bias valve mounted up front to vary the pressure at the calipers?

CG

[Stuart]

yes. i belive this is basically how fearless did bretts car.

and im 90% sure thats how CP did Dans brakes.

[MARTIN KELSON]

Yes that was how Fearless did Bretts and how i did mine.
Works a treat but not easy to cap off the redundant outlet as its a weird size.

[Stuart]

cap it off with a std nova fitting and spare solid pipe thats crimped up and braised ;)