View Full Version : Speedlines on rear with 60mm drop
Do you need to mod the arches with 16" Speedline Alesio (sp.) wheels on?
Back is lowered 60mm - possibly putting 70mm Coilspring springs on.
Cheers!
Rob.
(sorry - I'm sure this is a very common question!!!)
STE Novavanman
23-10-05, 05:57 PM
depend if its on mk2 or mk1
if mk2 you should get away with it if your on correct et mesurements
if mk1 will need to do some mods as the inner and outer arches are 1.5 inches closer
Is a mk. 2 so will hopefully be ok!
Cheers!
leemh1234
23-10-05, 06:07 PM
should be ok mine was on speedlines and it was ok 8)
mine fine at 80-90mm on speed lines
mine fine at 80-90mm on speed lines
Amazing.
Any pics of it that low?
Rob.
:+:
best i could find,
was lowing but had rubbing probs...so had to raise her a bit pic taken just after she came off the jack..
http://i6.photobucket.com/albums/y232/bennh2/novaabbisidelow2.jpg
Fook, is that the middle of the exhaust i see touching the ground? :lol:
Awesome car.
Amazing!
Looks mint!
Thanks.
yeah thats the center box,
cars a lil higer now due to rubbing,
What tyre profile were you running on the Speedlines?
F188CHG
24-10-05, 09:52 AM
Its bootifull m8 :wink:
195/45
when it was fully low it was rubbing at the top of the inside of the arch when the shoch bolts thru in to the boot,
but DONT rub on the arch lips at all!
Spot on!
Cheers for your help matey!
STE Novavanman
24-10-05, 08:21 PM
my cars dropped on 16's but they are slightly wider then the speedlines and dropped 100mm the only prob is they rub on outer arch until i bought some tilted sidewall tyres
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.