View Full Version : here she is!
General Baxter
20-08-05, 12:44 PM
yes i know its muppet corner, becasue it looks like a joke :lol:
needs LOADS of work!
ill get more photos when cam batts charge, there a massive hole the other side arch, that big i could sit in it :lol:
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000366.jpg
Philsutton
20-08-05, 12:46 PM
its got its fair bit of rust on it. So you managed to rob it off the other guy then
General Baxter
20-08-05, 12:46 PM
i broke his legs! :wink:
nar it was too rusted for him :roll:
p.s: how the fudge do you get the roof down? :P
Philsutton
20-08-05, 12:49 PM
so then how does this fancy roof work, looks like you need to camp out in order to get it off. None of this press a button an it folds up crap.
General Baxter
20-08-05, 12:54 PM
None of this press a button an it folds up crap.
if there was i doubt it would work anyway :lol:
boredbloke
20-08-05, 01:33 PM
what did you give him for it?
its a wheely bin with a bin bag stuck to it :lol:
you've got your work cut out lol
General Baxter
20-08-05, 01:58 PM
what did you give him for it?
100 of my fine english pounds
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000381.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000380.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000379.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000378.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000377.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000376.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000375.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000374.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000373.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000372.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000371.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000370.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000369.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000368.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000367.jpg
the chasis is about 97% ok, battery tray 99% :D
the only good think about is that it starts, the radio works, all electrics and tyres are very new LOL
peester
20-08-05, 03:09 PM
wow, needs a nut an bolt really, do summat along the lines of eminem's (sp?) (the dutch guy) cabbie..?
^ Enem lol
Christ that looks more rust than car.... interior looks pretty clean tho, even if it is the natty Club one lol
James B
20-08-05, 04:17 PM
ah it'll be alright, couple of years left in that baby as it is :lol:
General Baxter
20-08-05, 05:19 PM
THESE ARE THE PHOTOS YOU HAVE BEEN WAITING TO SEE :lol:
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000391.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000390.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000388.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000387.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000386.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000385.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000384.jpg
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000383.jpg
Philsutton
20-08-05, 05:21 PM
dear god thats shells gonna need some welding, ive scraped much much better shells than that
General Baxter
20-08-05, 05:23 PM
all be worth it, crusing with burgo in the passenger seat with the wind blowing thru his long girlish hair :lol:
fuck me baxter :o
youll gonna have your work cut out
Hmm, I think that may fail an MOT on rust lol
all be worth it, crusing with burgo in the passenger seat with the wind blowing thru his long girlish hair :lol:
LMFAO!
stripped that quick!
I reckon you should do it up in the style of a Nova Sport - seeing as the grafix will them match the interior.
Would look good too.
Looks like you need new sills, arched, doors, rear hatch and some serious engine bay cleaning up!
Good luck mate - if you can pull it off should look well smart!
8)
scott.parker
20-08-05, 09:39 PM
Oh dear god baxter what have you got your self into! :o
That car is going to need a lot of work,i hope you/or someone you know is good with welding and bodywork etc,as it needs a lot..
Have you checked the chassis rail to the rear and the rear susspension turuts??? i can see this taking a long time,and your far too inpatient to finish it..
Scott
dooooney
20-08-05, 09:56 PM
Oh dear god baxter what have you got your self into!
he may have gooten in it but will he fall threw the floor of it?
did u get that off ebay casue i think that was on ebay i posted about it i was gona get it or one simmalar but it needed a lot of work and i aint got nowere to do it or the time, or the gf that will put up with me havin another nova lol
if u do this m8 it will be a 1 off and it will b wicked
It was on ebay. He bought* it off the guy who won it....
*by bought I mean broke his legs lol
General Baxter
20-08-05, 10:38 PM
That car is going to need a lot of work,i hope you/or someone you know is good with welding and bodywork etc,as it needs a lot..
im a coded welder
Have you checked the chassis rail to the rear and the rear susspension turuts???
would you beleave it that there rather good! went around hitting it with a hammer :lol:
i can see this taking a long time,and your far too inpatient to finish it..
I dont Lol, totaly striped, ready to cut old crap off (which will be done sunday! and weld new panels on which arrive next week
ahem, thought you had all the replacement panels lol :lol:
General Baxter
20-08-05, 10:41 PM
i needed a rear panel!
iv missplaced the one i had! :oops:
theres not even any holes in the rear suspension 'cups' soild as a rock :wink:
lol, you miss placed a panel :lol:
how far have you got with it any way?
General Baxter
20-08-05, 10:51 PM
front panel, arches, rear panel, ready to be cut off!
wings, engine, fuel lines, fuel tank, dash, carpet, seats, roof, boot, doors, glass, seals, lights, rad, brakes, all off!
lol you don't mess about baxter :lol:
looks like a project and a half there mate, needs a lot of work like everyone said but keep at it drop the tubro in it and you will be cruising with burgo and his freakishly long hair lol
I'll be the first to hand you a half eaten cookie once finished baxter, choice of either white choc/double choc or funky M&M's your call :lol:
Col_Mk1
21-08-05, 02:33 PM
keep up the good work lad
General Baxter
21-08-05, 06:41 PM
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000396.jpg
new front panel on, new lights, wings placed on, fixed the suspension struts,
you don't half work fast :lol:
starting to look like a nova again
General Baxter
21-08-05, 07:44 PM
http://i11.photobucket.com/albums/a191/baxters83/My%20Cars/IM000397.jpg
clean! just got to remove some more bits then can prime the lower half :P
soo at the end of the week it'll be finished then baxter :lol:
boredbloke
21-08-05, 10:48 PM
fookin go for it mate bout time u did somink like this,
could turn out to be a real head turner, so are the plans to make it as standard as posible?
for that comment baxter im am about to pm you a serious offer
boredbloke
22-08-05, 08:47 AM
^^
thatou'll give him a hand while he's got you in the passenger seat....?
:lol:
ANDYRACER
22-08-05, 05:24 PM
Flippin heck Baxter u dont mess about. Big respect to u for going for it will look mint when finished.
yeah your pushing along arnt you!!!! carry on son.....
sickrabbit
23-08-05, 06:21 PM
Baxter - you dont mess about mate - talk about work em to the bone . Keep going , looking foward to the fruits of your labour....
mad-driver
23-08-05, 11:31 PM
Nice one mate, if you need to sell some more engine bits (ie cam) to fund your new project you know who to call :wink:
General Baxter
05-09-05, 09:46 PM
oooo update!
i have an arch, well i would have done if i did not run out of welding wire! LOL
http://i11.photobucket.com/albums/a191/baxters83/cabro%20rebuild/Picture001.jpg
NovalutionGSi
06-09-05, 09:54 AM
Nice work fella, and once your done you think you could pop up to my house and sort out my GSi??? :lol:
novamadcars
06-09-05, 10:55 AM
good progress baxter keep up the good work mate
General Baxter
06-09-05, 04:43 PM
http://i11.photobucket.com/albums/a191/baxters83/cabro%20rebuild/Picture.jpg
what were the inner sills like baxter?
General Baxter
06-09-05, 08:09 PM
rather good, just slight surface rust, all cleaned off and painted now to :)
well its getting there, you'll just need some new doors lol
General Baxter
06-09-05, 08:12 PM
yep be time to take the GM sticker and bubble wrap of my new ones :wink:
novamadcars
07-09-05, 09:34 AM
any more updated pics baxter and what colour you spraying it (white) or a totaly diffrent colour?
give you your dews baxter.
you are making short work of this job.
well done matey
i love the interior
old-school !
yep be time to take the GM sticker and bubble wrap of my new ones :wink:
you can't have the doors already lol :lol:
General Baxter
11-09-05, 02:45 PM
body kit fits, well kinda :lol:
http://i11.photobucket.com/albums/a191/baxters83/cabro%20rebuild/Picture003.jpg
http://i11.photobucket.com/albums/a191/baxters83/cabro%20rebuild/Picture004.jpg
http://i11.photobucket.com/albums/a191/baxters83/cabro%20rebuild/Picture005.jpg
scott.parker
11-09-05, 02:48 PM
So your going to try make spider/funny cab rep?? bit unsure tbh
General Baxter
11-09-05, 02:49 PM
rare car, rare kit needed
scott.parker
11-09-05, 02:55 PM
Would you not be just best to make it 100% standard again just a restore job,as adding the spider kits a bit like putting a GSI kit on a 1.2 but even worse mate,just my opinion..
Scott
novamadcars
11-09-05, 10:55 PM
i fink the kit looks good on it baxter keep up the work mate
if i were you baxter i would of restored back to original but if you are modding that praps ill convert mine :wink:
General Baxter
11-09-05, 11:18 PM
luke your too common you got a saloon :wink:
at the moment its a saloon :wink:
probert_nova
12-09-05, 12:18 AM
i think if i'd had the cab i would have done exactly the same as you've done baxter (money permitin).keep up the good work.
I would of returned it to standard personally.
But, i told you that you wouldn't do it and end up scrapping it, but it seems you are going to finish this project :lol: :D
Nice one baxter :wink: :+:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.