View Full Version : door removal
i would like to know which tool i should use to remove the pins from the door, so i can take them off. thanks. :?: :?
you can buy a door pin removal tool
or you can use an old bonnet stay - cut it down to a good length and its the right size to knock the pins out with
top pin goes down, bottom pin goes up :wink:
stock hatch rac
25-08-05, 09:12 PM
I have found that over the years pins become seized in - so a few drops of oil and let it soak in help get them out
leemh1234
26-08-05, 01:48 AM
use a bonnet stay as already said.its alot cheaper than the tool and that aint worth a wan* i've tryed it so i know the stay works 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.